rf micro devices inc . 7628 thorndike road, greensboro, nc 27409 - 9421 ds131025 for sales or technical support, contact rfmd at +1.336.678.5570 or customerservice@rfmd.com . rf micro devices ? and rfmd ? are trademarks of rfmd, llc. bluetooth is a trademark owned by bluetooth sig, inc., u.s.a. and licensed for use by rfmd. all other trade names, trademarks , and registered trademarks are the property of their respective owners. ?2013, rf micro devices, inc. 1 of 7 rfrx1701 gaas mmic iq downconverter 1 7.7 ghz to 26.5 ghz rfmd's rfrx1701 is a 17.7 ghz to 26.5 ghz gaas phe mt d ownconverter, incorporating a low - noise amplifier, an integrated x2 lo frequency multiplier and buffer amplifier, and an image rejection mixer. the combination of high performance part and low cost packaging makes the rfrx1701 a cost effective solution, ideally suited to both current and next generation point - to - point microwa ve radio and satellite applications. rfrx1701 is packaged in a 5mm x 5mm qfn to simplify both system level board design and volume assembly. functional block diagram ordering information rfrx1701 s2 sample bag with 2 pieces rfrx1701 sb bag with 5 pieces rfrx1701 sq b ag with 25 pieces rfrx1701 sr 100 p ieces rfrx1701 tr7 7" reel with 750 pieces rfrx1701 pcba - 410 evaluation board package: qfn, 32 - pin, 5 mm x 5 mm x 0.95mm features rf frequency: 17.7 ghz to 26.5 ghz lo frequency: 6 .85 ghz to 15.25 ghz if frequency: dc to 4ghz conversion gain: 13 db noise figure: 2. 5 db iip3: 6 dbm image rejection: 15dbc low cost 5mm x 5mm qfn package applications point - to - point radio point - multipoint radio satellite communications radar electronic war fare rfrx1701
rf micro devices inc . 7628 thorndike road, greensboro, nc 27409 - 9421 ds131025 for sales or technical support, contact rfmd at +1.336.678.5570 or customerservice@rfmd.com . the information in this publication is believed to be accurate. however, no responsibility is assumed by rf micro devices, in c. ("rfmd") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. no license is granted by implication or otherwise under any patent or patent rights of rfmd. rfmd reserves the right to change component ci rcuitry, recommended application circuitry and specifications at any time without prior notice. 2 of 7 rfrx1701 absolute maximum rat ings parameter rating unit lna drain voltage (v d ) 6 v loa drain voltage (v d ) 6 v rf input power 1 0 dbm lo input power 15 dbm t oper - 40 to +85 c t stor - 65 to +150 c esd human body model class 1a caution! esd sensitive device. rfmd green: rohs compliant per eu directive 2011/65/eu, halogen free per iec 61249 - 2 - 21, <1000ppm each of antimony trioxide in polymeric materials and red phosphorus as a flame retardant, and <2% antimony solder. exceeding any one or a combination of the absolute maximum rating conditions may cause permanent damage to the device. extended application of absolute maximum rating conditions to the device may reduce device reliability. specified typical performance or functional operation of the device under absolute maximum rating conditions is not implied. nominal operating parameters parameter specification unit condition min typ max general performance rf frequency 17.7 26.5 ghz lo frequency 6.85 15.25 ghz if frequency dc 4.0 ghz lo input drive +5 dbm conversion gain 13 db nf (17.7g h z to 19.7ghz) 2.5 db nf (21.2ghz to 23.6ghz) 2.7 db nf (24.5ghz to 26.5ghz) 2.9 db iip3 6 dbm image rejection 15 db lo - rf isolation 40 db lo - if isolation 15 db lo return loss 12 db rf return loss 12 db v d 3 to 5 v i d 350 ma notes: measurements performed on part soldered on evaluation board with sma connectors and if ports connected to an external 90 hybrid combiner and lo power of +5dbm and at 25c, unless otherwise stated. if = 2.5ghz, rf power = - 20dbm, iip3 is measured with a 2 - tone input of - 23dbm power for each tone and f = 10mhz, vd1 = 3v, vd2 = 4v, vd3 through vd5 = 5v, mixerbias = 0v
rf micro devices inc . 7628 thorndike road, greensboro, nc 27409 - 9421 ds131025 for sales or technical support, contact rfmd at +1.336.678.5570 or customerservice@rfmd.com . the information in this publication is believed to be accurate. however, no responsibility is assumed by rf micro devices, in c. ("rfmd") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. no license is granted by implication or otherwise under any patent or patent rights of rfmd. rfmd reserves the right to change component ci rcuitry, recommended application circuitry and specifications at any time without prior notice. 3 of 7 rfrx1701 typical electrical performance measurements performed on part soldered on evaluation board with sma connectors and if ports connected to an external 90 hybrid combiner and lo power of +5dbm, unless otherwise stated. if = 2.5ghz, rf power = - 20dbm, iip3 is measured with a 2 - tone input of - 23dbm power for each tone and f = 10mhz, vd1 = 3v, vd2 = 4v, vd3 through vd5 = 5v, mixerbias = 0v.
rf micro devices inc . 7628 thorndike road, greensboro, nc 27409 - 9421 ds131025 for sales or technical support, contact rfmd at +1.336.678.5570 or customerservice@rfmd.com . the information in this publication is believed to be accurate. however, no responsibility is assumed by rf micro devices, in c. ("rfmd") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. no license is granted by implication or otherwise under any patent or patent rights of rfmd. rfmd reserves the right to change component ci rcuitry, recommended application circuitry and specifications at any time without prior notice. 4 of 7 rfrx1701 typical electrical performance (continued)
rf micro devices inc . 7628 thorndike road, greensboro, nc 27409 - 9421 ds131025 for sales or technical support, contact rfmd at +1.336.678.5570 or customerservice@rfmd.com . the information in this publication is believed to be accurate. however, no responsibility is assumed by rf micro devices, in c. ("rfmd") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. no license is granted by implication or otherwise under any patent or patent rights of rfmd. rfmd reserves the right to change component ci rcuitry, recommended application circuitry and specifications at any time without prior notice. 5 of 7 rfrx1701 pin out pin names and descriptions pin name description 1 - 4 n/c not connected 5 gnd ground 6 rf rf input, ac coupled and matched to 50 7 gnd ground 8 - 9 n/c not connected 10 gnd ground 11 if1 if1 output 12 gnd ground 13 if2 if2 output 14 gnd ground 15 mixer bias mixer bias = 0v 16 n/c not connected 17 gnd ground 18 lo lo input, ac coupled and matched to 50 19 gnd ground 20 - 24 n/c not connected 25 vd5 vd5 (loa bias) = 5v 26 vd4 vd4 (loa bias) = 5v 27 n/c not connected 28 vd3 vd3 (loa bias) = 5v 29 n/c not connected 30 vd2 lna drain bias2 = 4v 31 n/c not connected 32 vd1 lna drain bias1 = 3v
rf micro devices inc . 7628 thorndike road, greensboro, nc 27409 - 9421 ds131025 for sales or technical support, contact rfmd at +1.336.678.5570 or customerservice@rfmd.com . the information in this publication is believed to be accurate. however, no responsibility is assumed by rf micro devices, in c. ("rfmd") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. no license is granted by implication or otherwise under any patent or patent rights of rfmd. rfmd reserves the right to change component ci rcuitry, recommended application circuitry and specifications at any time without prior notice. 6 of 7 rfrx1701 package outline drawing ( dimensions in millimeters ) application circuit block diagram
rf micro devices inc . 7628 thorndike road, greensboro, nc 27409 - 9421 ds131025 for sales or technical support, contact rfmd at +1.336.678.5570 or customerservice@rfmd.com . the information in this publication is believed to be accurate. however, no responsibility is assumed by rf micro devices, in c. ("rfmd") for its use, nor for any infringement of patents or other rights of third parties resulting from its use. no license is granted by implication or otherwise under any patent or patent rights of rfmd. rfmd reserves the right to change component ci rcuitry, recommended application circuitry and specifications at any time without prior notice. 7 of 7 rfrx1701 evaluation board layout test conditions lo power +5dbm rf power - 20dbm vd1 3 .0 v vd 2 4 .0 v vd3, vd4, vd5 5 .0 v mixer bias 0 v
|
